- Home
- Flow
- Myers Pump Solutions
- Myers Products
- Myers Residential Water Supply Pumps
- Myers Booster Pumps
- Pentair Myers MPB Series High Pressure Booster Pumps
Resources
Downloads
The MPB series serviceable high pressure booster pumps are the most durable booster pumps available. The floating impeller design minimizes thrust loads, allowing for continuous operation without damage to motor bearings, mechanical seal or pump hydraulic components.
| Item # | GPM | Horsepower | Stages | MAXIMUM DISCHARGE PRESSURE | MAXIMUM INLET PRESSURE | MAXIMUM TOTAL PRESSURE | DISCHARGE SIZE | AMP DRAW full load | Voltage | MAXIMUM WATER TEMPERATURE | Discharge | MOTOR ADAPTER & BASE | Impeller | DIFFUSER | Shaft | O-RINGS | MECHANICAL SEAL |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MPB Series | 300 PSI (model 10MPB200) | 80 PSI | Pump Pressure + Inlet Pressure Not to Exceed 315 PSI | 3/4", 1", or 1-1/4" NPT (model dependent) | max of 26 Amps (2 HP running on 115v) | 230v/115v or 230v, AC, 1-phase | Prolonged use with liquids above 140 degrees F is not recommended | Cast Iron | Cast Iron | Acetal | Polycarbonate | 304 Grade Stainless Steel | Buna-N | Mechanical Seal - Carbon/Ceramic, Buna-N | |||
| 7MPB50 | 7 | 1/2 | 9 | 80 PSI | Pump Pressure + Inlet Pressure Not to Exceed 315 PSI | 115/230 | Prolonged use with liquids above 140° F is not recommended. | Cast Iron | Cast Iron | Acetal | Polycarbonate | 300 series stainless steel | Buna-N | Carbon/Ceramic, Buna-N | |||
| 7MPB75 | 7 | 3/4 | 12 | ||||||||||||||
| 7MPB100 | 7 | 1 | 16 | ||||||||||||||
| 10MPB50 | 10 | 1/2 | 6 | ||||||||||||||
| 10MPB75 | 10 | 3/4 | 8 | ||||||||||||||
| 10MPB100 | 10 | 1 | 10 | ||||||||||||||
| 10MPB150 | 10 | 1-1/2 | 14 | ||||||||||||||
| 10MPB200 | 10 | 2 | 16 | 300 PSI | |||||||||||||
| 20MPB100 | 20 | 1 | 7 |
| Item # | GPM | Horsepower | Stages | MAXIMUM DISCHARGE PRESSURE | MAXIMUM INLET PRESSURE | MAXIMUM TOTAL PRESSURE | DISCHARGE SIZE | AMP DRAW full load | Voltage | MAXIMUM WATER TEMPERATURE | Discharge | MOTOR ADAPTER & BASE | Impeller | DIFFUSER | Shaft | O-RINGS | MECHANICAL SEAL |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MPB Series | 300 PSI (model 10MPB200) | 80 PSI | Pump Pressure + Inlet Pressure Not to Exceed 315 PSI | 3/4", 1", or 1-1/4" NPT (model dependent) | max of 26 Amps (2 HP running on 115v) | 230v/115v or 230v, AC, 1-phase | Prolonged use with liquids above 140 degrees F is not recommended | Cast Iron | Cast Iron | Acetal | Polycarbonate | 304 Grade Stainless Steel | Buna-N | Mechanical Seal - Carbon/Ceramic, Buna-N | |||
| 7MPB50 | 7 | 1/2 | 9 | 80 PSI | Pump Pressure + Inlet Pressure Not to Exceed 315 PSI | 115/230 | Prolonged use with liquids above 140° F is not recommended. | Cast Iron | Cast Iron | Acetal | Polycarbonate | 300 series stainless steel | Buna-N | Carbon/Ceramic, Buna-N | |||
| 7MPB75 | 7 | 3/4 | 12 | ||||||||||||||
| 7MPB100 | 7 | 1 | 16 | ||||||||||||||
| 10MPB50 | 10 | 1/2 | 6 | ||||||||||||||
| 10MPB75 | 10 | 3/4 | 8 | ||||||||||||||
| 10MPB100 | 10 | 1 | 10 | ||||||||||||||
| 10MPB150 | 10 | 1-1/2 | 14 | ||||||||||||||
| 10MPB200 | 10 | 2 | 16 | 300 PSI | |||||||||||||
| 20MPB100 | 20 | 1 | 7 | ||||||||||||||
| 20MPB150 | 20 | 1-1/2 | 9 | ||||||||||||||
| 20MPB200 | 20 | 2 | 11 | ||||||||||||||
| 20MPB300 | 20 | 3 | 15 | ||||||||||||||
| 30MPB100 | 30 | 1 | 5 | ||||||||||||||
| 30MPB150 | 30 | 1-1/2 | 6 | ||||||||||||||
| 30MPB200 | 30 | 2 | 7 | ||||||||||||||
| 30MPB300 | 30 | 3 | 11 |
| Item # | GPM | Horsepower | Stages | MAXIMUM DISCHARGE PRESSURE | MAXIMUM INLET PRESSURE | MAXIMUM TOTAL PRESSURE | DISCHARGE SIZE | AMP DRAW full load | Voltage | MAXIMUM WATER TEMPERATURE | Discharge | MOTOR ADAPTER & BASE | Impeller | DIFFUSER | Shaft | O-RINGS | MECHANICAL SEAL |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MPB Series | 300 PSI (model 10MPB200) | 80 PSI | Pump Pressure + Inlet Pressure Not to Exceed 315 PSI | 3/4", 1", or 1-1/4" NPT (model dependent) | max of 26 Amps (2 HP running on 115v) | 230v/115v or 230v, AC, 1-phase | Prolonged use with liquids above 140 degrees F is not recommended | Cast Iron | Cast Iron | Acetal | Polycarbonate | 304 Grade Stainless Steel | Buna-N | Mechanical Seal - Carbon/Ceramic, Buna-N | |||
| 7MPB50 | 7 | 1/2 | 9 | 80 PSI | Pump Pressure + Inlet Pressure Not to Exceed 315 PSI | 115/230 | Prolonged use with liquids above 140° F is not recommended. | Cast Iron | Cast Iron | Acetal | Polycarbonate | 300 series stainless steel | Buna-N | Carbon/Ceramic, Buna-N | |||
| 7MPB75 | 7 | 3/4 | 12 | ||||||||||||||
| 7MPB100 | 7 | 1 | 16 | ||||||||||||||
| 10MPB50 | 10 | 1/2 | 6 | ||||||||||||||
| 10MPB75 | 10 | 3/4 | 8 | ||||||||||||||
| 10MPB100 | 10 | 1 | 10 | ||||||||||||||
| 10MPB150 | 10 | 1-1/2 | 14 | ||||||||||||||
| 10MPB200 | 10 | 2 | 16 | 300 PSI | |||||||||||||
| 20MPB100 | 20 | 1 | 7 | ||||||||||||||
| 20MPB150 | 20 | 1-1/2 | 9 | ||||||||||||||
| 20MPB200 | 20 | 2 | 11 | ||||||||||||||
| 20MPB300 | 20 | 3 | 15 | ||||||||||||||
| 30MPB100 | 30 | 1 | 5 | ||||||||||||||
| 30MPB150 | 30 | 1-1/2 | 6 | ||||||||||||||
| 30MPB200 | 30 | 2 | 7 | ||||||||||||||
| 30MPB300 | 30 | 3 | 11 |
1-year limited warranty
Loading...